For Full Set of Questions Please Visit

Please download to get full document.

View again

of 64
10 views
PDF
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Document Description
For Full Set of Questions Please Visit
Document Share
Document Tags
Document Transcript
  Cisco.350-001.v3.21.146q Vendor :  Cisco Exam Name :  Cisco Certified Internetworking Expert Exam Code :  350-001 For Full Set of Questions Please Visit : http://www.ExamReal.com/350-001.html  Exam AQUESTION 1 What is the purpose of an explicit "deny any" statement at the end of an ACL? A.none, since it is implicitB.to enable Cisco IOS IPS to work properly; however, it is the deny all traffic entry that is actually requiredC.to enable Cisco IOS Firewall to work properly; however, it is the deny all traffic entry that is actuallyrequiredD.to allow the log option to be used to log any matchesE.to prevent sync flood attacksF.to prevent half-opened TCP connections Correct Answer: D ExplanationExplanation/Reference:QUESTION 2 Which of these is mandatory when configuring Cisco IOS Firewall? A.Cisco IOS IPS enabled on the untrusted interfaceB.NBAR enabled to perform protocol discovery and deep packet inspectionC.a route map to define the trusted outgoing trafficD.a route map to define the application inspection rulesE.an inbound extended ACL applied to the untrusted interface Correct Answer: E ExplanationExplanation/Reference:QUESTION 3 Which statement correctly describes the disabling of IP TTL propagation in an MPLS network? A.The TTL field from the IP packet is copied into the TTL field of the MPLS label header at the ingressedge LSR.B.TTL propagation cannot be disabled in an MPLS domain.C.TTL propagation is only disabled on the ingress edge LSR.D.The TTL field of the MPLS label header is set to 255.E.The TTL field of the IP packet is set to 0. Correct Answer: D ExplanationExplanation/Reference:QUESTION 4 Two routers configured to run BGP have been connected to a firewall, one on the inside interface and oneon the outside interface. BGP has been configured so the two routers should peer, including the correctBGP session endpoint addresses and the correct BGP session hop-count limit (EBGP multihop). What is agood first test to see if BGP will work across the firewall? A.Attempt to TELNET from the router connected to the inside of the firewall to the router connected to theoutside of the firewall. If telnet works, BGP will work, since telnet and BGP both use TCP to transportdata. Cisco 350-001 Exam | ExamReal.comContact Us : support@examreal.com Get Success in Passing Your Certification Exam at first attempt  B.Ping from the router connected to the inside interface of the firewall to the router connected to theoutside interface of the firewall. If you can ping between them, BGP should work, since BGP uses IP totransport packets.C.There is no way to make BGP work across a firewall without special configuration, so there is no simpletest that will show you if BGP will work or not, other than trying to start the peering session.D.There is no way to make BGP work across a firewall. Correct Answer:  A ExplanationExplanation/Reference:QUESTION 5 Spanning Tree Protocol IEEE 802.1s defines the ability to deploy which of these? A.one global STP instance for all VLANsB.one STP instance for each VLANC.one STP instance per set of VLANsD.one STP instance per set of bridges Correct Answer: C ExplanationExplanation/Reference:QUESTION 6 Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree ProtocolIEEE 802.1D? (Choose two.) A.Designated Root CostB.bridge ID priorityC.max ageD.bridge ID MAC addressE.Designated Root PriorityF.forward delay Correct Answer: BD ExplanationExplanation/Reference:QUESTION 7 If a port configured with STP loop guard stops receiving BPDUs, the port will be put into which state? A.learning stateB.listening stateC.forwarding stateD.root-inconsistent state Correct Answer: D ExplanationExplanation/Reference:QUESTION 8 Cisco 350-001 Exam | ExamReal.comContact Us : support@examreal.com Get Success in Passing Your Certification Exam at first attempt  What is the purpose of the STP PortFast BPDU guard feature? A.enforce the placement of the root bridge in the network PassGuide.com-Make You Succeed To Pass ITExamsB.ensure that a port is transitioned to a forwarding state quickly if a BPDU is receivedC.enforce the borders of an STP domainD.ensure that any BPDUs received are forwarded into the STP domain Correct Answer:  A ExplanationExplanation/Reference:QUESTION 9 When STP UplinkFast is enabled on a switch utilizing the default bridge priority, what will the new bridgepriority be changed to? A.8192B.16384C.49152D.65535 Correct Answer: C ExplanationExplanation/Reference:QUESTION 10 Which of these best describes the actions taken when a VTP message is received on a switch configuredwith the VTP mode "transparent"? A.VTP updates are ignored and forwarded out all ports.B.VTP updates are ignored and forwarded out trunks only.C.VTP updates are made to the VLAN database and are forwarded out trunks only.D.VTP updates are ignored and are not forwarded. Correct Answer: B ExplanationExplanation/Reference:QUESTION 11 Refer to the exhibit. In this network, R1 has been configured to advertise a summary route, 168.0.0/22, toR2. R2 has been configured to advertise a summary route, 192.168.0.0/21, to R1. Both routers have beenconfigured to remove the discard route (the route to null created when a summary route is configured) bysetting the administrative distance of the discard route to 255.What will happen if R1 receives a packet destined to 192.168.3.1? Cisco 350-001 Exam | ExamReal.comContact Us : support@examreal.com Get Success in Passing Your Certification Exam at first attempt   A.The packet will loop between R1 and R2.PassGuide.com-Make You Succeed To Pass IT ExamsPassGuide 350-001B.It is not possible to set the administrative distance on a summary to 255.C.The packet will be forwarded to R2, where it will be routed to null0.D.The packet will be dropped by R1, since there is no route to 192.168.3.1. Correct Answer:  A ExplanationExplanation/Reference:QUESTION 12 Refer to the exhibit. In this network, R1 is configured not to perform autosummarization within EIGRP.What routes will R3 learn from R2 through EIGRP? A.172.30.1.0/24 and 10.1.2.0/24; EIGRP only performs autosummarization at the edge between twomajor networks.B.172.30.0.0/16 and 10.1.2.0/24; R2 will perform autosummarization, although R1 will not.C.Since R2 is configured without autosummarization, it will not propagate the 172.30.1.0/24 route.D.172.30.0.0/8 and 10.0.0.0/8. Correct Answer:  A ExplanationExplanation/Reference:QUESTION 13 The classic Spanning Tree Protocol (802.1D 1998) uses which sequence of variables to determine thebest received BPDU? Cisco 350-001 Exam | ExamReal.comContact Us : support@examreal.com Get Success in Passing Your Certification Exam at first attempt
Similar documents
View more...
Search Related
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks